> For the complete documentation index, see [llms.txt](https://guides-mechboards.gitbook.io/guides/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://guides-mechboards.gitbook.io/guides/mbuk-build-guides/corne-min.md).

# Corne Min

## Installing Keycaps

To install keycaps, place the keycap over the switch at a 45 degree angle to catch the bottom side switch hooks, then push down.

<figure><img src="/files/Yxzvh2odcADqb4cEJfoH" alt=""><figcaption></figcaption></figure>

## Clear Keycaps

{% hint style="warning" %}
THESE HAVE AN ORIENTATION
{% endhint %}

<figure><img src="/files/tS5nmlG7gFJavRIN1qFn" alt=""><figcaption></figcaption></figure>

The small numbers below the middle of the keycap should be on the bottom side of the switch.

## Removing Keycaps

{% hint style="danger" %}
**CAREFUL** - If done incorrectly, removing keycaps can break the switch. We do not suggest removing keycaps unless completely necessary
{% endhint %}

Push away HARD from you on the lower edge of the keycap, and then use tweezers to pry each of the top corners off.

<figure><img src="/files/KugxtV90iYNbGYCTavTA" alt=""><figcaption></figcaption></figure>

## Getting Started Guide

{% content-ref url="/pages/pE13Den4r2gdQrkAUu1k" %}
[Corne Min](/guides/getting-started/corne-min.md)
{% endcontent-ref %}